DAB/DAB+
Contents
DAB/DAB+
The DAB/DAB+ USB Stick decodes DAB/DAB+ onchip and transfers the decoded audio data fully digital to the host system. Currently Linux and MacOS are supported.
Installation Linux
open a terminal and enter following commands:
sudo -s wget http://sundtek.de/media/sundtek_netinst.sh chmod 777 sundtek_netinst.sh ./sundtek_netinst.sh
In case you want to distribute the local stations digitally you can also install our streaming server (again on the commandline)
just run following commands: sudo -s /opt/bin/mediaclient --installstreamer
In case you want to use our DAB/DAB+ Player:
http://sundtek.de/media/Sundtek_DAB_FM_Radio-fcc2a03-x86_64.AppImage
Be sure you set the downloaded binary to executable before trying to run it (right mouse click, permissions, check executable)
Installation MacOSX
MacOSX:
- https://www.sundtek.de/media/sundtek_driver_macosx_190728.0317.dmg - https://www.sundtek.de/media/sundtek_dab_fm_player_190728.0245.dmg
First install the driver, afterwards run the DAB Player. The split driver also allows other application developer to integrate and use those devices.
Installation Raspberry PI
In case you don't want to use our radio application, the installation is the same as on a regular linux system
sudo -s wget http://sundtek.de/media/sundtek_netinst.sh chmod 777 sundtek_netinst.sh ./sundtek_netinst.sh
Radio Application:
cd $HOME sudo apt-get install qt5-default wget http://sundtek.de/media/dablet_raspbian.tar.gz tar xf dablet_raspbian.tar.gz ./dablet
DAB/DAB+ commandline interface
scan for transponders:
/opt/bin/mediaclient --scandabfrequencies /dev/dab0 scanning: 5A / 174928000 scanning: 5B / 176640000 scanning: 5C / 178352000 [LOCKED] scanning: 5D / 180064000 scanning: 6A / 181936000 scanning: 6B / 183648000 scanning: 6C / 185360000 scanning: 6D / 187072000 scanning: 7A / 188928000 scanning: 7B / 190640000 [LOCKED] scanning: 7C / 192352000 scanning: 7D / 194064000 [LOCKED] scanning: 8A / 195936000
tune to a transponder:
/opt/bin/mediaclient -m DAB -f 194064000 Using device: /dev/dab0 Tuning: 194064000 [LOCKED]
turn on direct audio playback in the driver (the driver will try to play back audio via alsa, pulseaudio or oss:
/opt/bin/mediaclient -m DAB -g off
scan a dab transponder:
/opt/bin/mediaclient --scandabservices /dev/dab0 Service Name, Service ID, Component ID BR-Klassik 0xd314 0xb Inforadio 0xd335 0x8 FH Europa 0xd496 0x3 radioeins 0xd332 0x1 radioBERLIN 88 8 0xd321 0x6 kulturradio 0xd323 0x5 Fritz 0xd333 0x7 Antenne 0xd431 0x0 SWR3 0xd3a3 0x4 Bayern 2 0xd412 0xc WDR2 0xd392 0x2 MDR JUMP 0xd3c2 0xd rbb TPEG 0xe0d11019 0xc00a rbb EPG 0xe0d01019 0xc009
Tune to a specific DAB station:
/opt/bin/mediaclient -m DAB -f 194064000 --sid 0xd321 Using device: /dev/dab0 Tuning: 194064000, 0xd321 [LOCKED]
Read signal statistics:
/opt/bin/mediaclient --readsignal=0 -d /dev/dab0 FREQUENCY: 178352000 LOCKED: YES RSSI: 172 SNR: 10 FIC_QUALITY: 100 CNR: 14 FREQUENCY: 178352000 LOCKED: YES RSSI: 173 SNR: 10 FIC_QUALITY: 100 CNR: 13 FREQUENCY: 178352000 LOCKED: YES RSSI: 172 SNR: 10 FIC_QUALITY: 100 CNR: 12 FREQUENCY: 178352000 LOCKED: YES RSSI: 173 SNR: 10 FIC_QUALITY: 100 CNR: 13 FREQUENCY: 178352000 LOCKED: YES RSSI: 173 SNR: 10 FIC_QUALITY: 100 CNR: 13 FREQUENCY: 178352000 LOCKED: YES RSSI: 173 SNR: 9 FIC_QUALITY: 100 CNR: 12 FREQUENCY: 178352000 LOCKED: YES RSSI: 173 SNR: 9 FIC_QUALITY: 100 CNR: 12
C API
Scan for DAB Frequencies
example:
int media_scan_dabfrequencies(char *device, int devfd, int console, int running) {
int fd;
int rv;
int nlen;
char tmp[30];
if (devfd>=0)
fd = devfd;
else
fd = net_open(device, O_RDWR);
if (fd>=0) {
struct dab_frequency dabf;
struct dab_tuner dabt;
int i;
int e;
int current_scan_index=-1;
struct dab_scan_setup setup;
struct dab_scan_parameters parameters;
memset(¶meters, 0x0, sizeof(struct dab_scan_parameters));
memset(&setup, 0x0, sizeof(struct dab_scan_setup));
net_ioctl(fd, DAB_SCAN_SETUP, &setup);
do {
net_ioctl(fd, DAB_SCAN_NEXT_FREQUENCY, ¶meters);
if (current_scan_index != parameters.scan_index) {
if (console>=0) {
sprintf(tmp, "%s %d\n", dab_frequency_list[parameters.scan_index].channel, dab_frequency_list[parameters.scan_index].freq*1000);
rv=write(console, tmp, nlen);
} else {
fprintf(stdout, "%s %d\n", dab_frequency_list[parameters.scan_index].channel, dab_frequency_list[parameters.scan_index].freq*1000);
fflush(stdout);
}
}
switch(parameters.status) {
case DAB_SCAN_LOCKED:
{
if (console>=0) {
rv=write(console, "[LOCKED]\n", 9);
} else {
fprintf(stdout, "[LOCKED]\n");
}
break;
}
case DAB_SCAN_SEARCHING:
usleep(10000);
break;
case DAB_SCAN_COMPLETE:
{
if (console>=0) {
rv=write(console, "[FINISHED]\n", 11);
} else {
fprintf(stdout, "\nScan completed\n");
}
break;
}
}
current_scan_index = parameters.scan_index;
if (console>=0 && running == 0)
break;
} while (parameters.status != DAB_SCAN_COMPLETE);
if (devfd == -1)
net_close(fd);
}
return 0;
}
Scan for DAB Services
int media_scan_dabservices(char *device) {
int fd;
int rv;
int i=0;
fd = net_open(device, O_RDWR);
if (fd>=0) {
struct dab_service service;
printf("Service Name, Service ID, Component ID\n");
while(1) {
service.id=i++;
rv = net_ioctl(fd, DAB_GET_SERVICE, &service);
if (rv == -1)
break;
printf("%16s\t0x%x\t0x%x\n", service.service_name, service.sid, service.comp[0]);
}
net_close(fd);
}
return 0;
}
DAB Get Date
int media_dab_get_date(char *device) {
int fd;
struct dab_time t;
printf("opening device: %s\n", device);
fd = net_open(device, O_RDWR);
memset(&t, 0x0, sizeof(struct dab_time));
if (fd>=0) {
printf("GET DAB TIME:\n");
net_ioctl(fd, DAB_GET_TIME, &t);
printf("%d-%d-%d %d:%d:%d\n", t.year, t.months, t.days, t.hours, t.minutes, t.seconds);
net_close(fd);
}
return 0;
}
Dab get Ensemble Info
int media_dab_get_ensemble_info(char *device) {
int fd;
struct dab_ensemble_info info;
printf("opening device: %s\n", device);
fd = net_open(device, O_RDWR);
if (fd>=0) {
printf("GET ENSEMBLE INFO:\n");
net_ioctl(fd, DAB_GET_ENSEMBLE_INFO, &info);
printf("Ensemble Label: %s\n", info.label);
net_close(fd);
}
return 0;
}
Mute
int set_mute(int fd, char *arg) {
int type = 0;
struct v4l2_control control;
if (strcmp(arg, "off") == 0) {
control.id = V4L2_CID_AUDIO_MUTE;
control.value = 0;
fprintf(stdout, "Enabling audiostream\n");
net_ioctl(fd, VIDIOC_S_CTRL, &control);
} else if (strcmp(arg, "on") == 0) {
fprintf(stdout, "Disabling audiostream\n");
control.id = V4L2_CID_AUDIO_MUTE;
control.value = 1;
net_ioctl(fd, VIDIOC_S_CTRL, &control);
} else
fprintf(stdout, "Wrong argument [%s] choose between on|off\n", arg);
return 0;
}
etc.
There are a few more features, in case you need more details just contact us.
